Is the Cisco 3850 a switch or a router?

Cisco 3850 as a Layer 3 Switch: Routing Capabilities

The Cisco 3850 is designed to provide high-performance switching and routing services in a single platform. As a Layer 3 switch, the Cisco 3850 operates at the network layer of the OSI model, which allows it to perform routing functions.

Is the Cisco 3850 end of life?

Cisco announces the End-of-sale and End-of-life dates for the Cisco Catalyst 3850 Series Switches. The last day to order the affected product(s) is September 5, 2023.

What replaced the Cisco 3850?

The Cisco Catalyst 9300 Series is Cisco's leading fixed enterprise switching access platform. It is the new generation of the access platform, with many additional capabilities, and is well suited for enterprises lo

Is Cisco 3850 PoE?

In addition to PoE (IEEE 802.3af), the Cisco Catalyst 3850 Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port.

What is the Cisco 3850 feature?

The Cisco Catalyst 3850 line has 24 or 48 Gigabit Ethernet ports, along with a modular design for the uplinks, allowing for configurations of either 4x Gigabit Ethernet, 2x 10-Gigabit Ethernet, or 4x 10- Gigabit Ethernet uplinks. Two specialty 3850 models allow for either 12 or 24 SFP+ ports for complete flexibility.

Does Cisco 3850 support VRF?

3850 supports VRF-Lite.

How much power does a 3850 use?

The power consumption of the Cisco Catalyst 3850 switches ranges from approximately 50 watts to 1100 watts, depending on the model and the number of installed modules or power supplies. The power supplies available for the Cisco Catalyst 3850 series include 350WAC, 715WAC, 1100WAC, and 440WDC options.

Is Cisco made in China?

Cisco manufactures networking switches and routers in Korea, China, Taiwan, Malaysia, and Singapore. Cisco designs, manufactures, and tests key switches in China using optical, powerline, WLAN, and media access control technology. Hope that answers the question of where are cisco products made.

How fast is Cisco 3850?

Interface Speed and Duplex Mode

Ethernet interfaces on the switch operate at 10, 100, 1000, or 10,000 Mb/s and in either full- or half-duplex mode.

Is Cisco 3850 stackable?

The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE Software-based platform.

Is 3850 a layer 3 switch?

The Cisco 3850 Catalyst switch is equipped with Layer 3 routing capabilities, allowing for efficient and scalable routing of network traffic. This enables the switch to intelligently route data between different networks or subnets, providing enhanced performance and optimized data delivery for your network.

Does Cisco 3850 support BGP?

BGP is advanced feature of Cisco 3850 series and it requires IP Services license.

What is the capacity of a Cisco 3850?

The Cisco 3850 switch series offers varying switching capacities depending on the specific model. The latest models in the series, such as the Cisco Catalyst 3850-48XS-S and 3850-48XS-F-S, offer a switching capacity of up to 2.56 Tbps (Terabits per second).

Are Cisco 3850 switches end of life?

Cisco announces the end-of-sale and end-of-life dates for the Cisco Catalyst 3850 Accessories. The last day to order the affected product(s) is May 31, 2023. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin.

What is the default VLAN for Cisco 3850?

VLAN 1 is the default VLAN and is created during system initialization. VLAN IDs 1002 through 1005 are reserved for Token Ring and FDDI VLANs. All of the VLANs except 1002 to 1005 are available for user configuration. There are 3 VTP versions: VTP version 1, version 2, and version 3.

What is the console port on a Cisco 3850 switch?

The console port on a Cisco 3850 switch is a physical interface that allows direct access to the switch's command-line interface (CLI) using a console cable. It is typically an RJ-45 port located on the front or back panel of the switch.

What is the maximum port channel for a Cisco 3850?

You can configure up to 48 port channels on a Cisco 3850 switch. Port channels, also known as EtherChannels or link aggregation groups, allow you to combine multiple physical links into a single logical link to increase bandwidth and provide redundancy.

Is the Cisco 3750 end of life?

Cisco announces the end-of-sale and end-of-life dates for the Cisco Catalyst 3750 Series Switches. The last day to order the affected product(s) is September 5, 2023.

Are Cisco 3850 network modules hot swappable?

Both the 3850 and 3750x series switches support up to 2 hot swappable power supplies.

Why is Cisco more expensive?

The company invests heavily in research and development to ensure that their devices meet the rigorous demands of modern networks. One of the main reasons behind the higher cost of Cisco devices is the use of high-quality components.

Does Cisco 3850 support NetFlow?

Also, any advanced flow analyzing, providing additional network security, can also be applied to the flow data received from the 3850 NetFlow exports. The Cisco Catalyst 3850 Flexible NetFlow exports open the door to some amazing flow reporting.

What is the throughput of Cisco catalyst 3850?

40 Gbps.

The throughput of Cisco Catalyst 3850 series switches varies depending on the specific model and configuration. The switches in this series are designed for high-performance and scalability in enterprise networks. They support various throughput options, including 1 Gbps, 10 Gbps, and even 40 Gbps per port.

Why Cisco is better than Juniper?

Juniper excels in simplicity, high-performance routing, and strong security features. Cisco offers versatility, reliability, and a diverse product range, making it a better fit for organizations seeking comprehensive networking solutions with extensive industry support.

Is Cisco 3850 PoE?

In addition to PoE (IEEE 802.3af), the Cisco Catalyst 3850 Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port.

Is Cisco 3850 a switch or a router?

Cisco 3850 as a Layer 3 Switch: Routing Capabilities

The Cisco 3850 is designed to provide high-performance switching and routing services in a single platform. As a Layer 3 switch, the Cisco 3850 operates at the network layer of the OSI model, which allows it to perform routing functions.

What is the Cisco 3850 feature?

The Cisco Catalyst 3850 line has 24 or 48 Gigabit Ethernet ports, along with a modular design for the uplinks, allowing for configurations of either 4x Gigabit Ethernet, 2x 10-Gigabit Ethernet, or 4x 10- Gigabit Ethernet uplinks. Two specialty 3850 models allow for either 12 or 24 SFP+ ports for complete flexibility.

Does Cisco 3850 support VRF?

3850 supports VRF-Lite.

How many Cisco 3850 switches can be stacked?

nine.

A switch stack can have up to nine stacking-capable switches connected through their StackWise-480 ports.

How fast is Cisco 3850?

Interface Speed and Duplex Mode

Ethernet interfaces on the switch operate at 10, 100, 1000, or 10,000 Mb/s and in either full- or half-duplex mode.

What power does a Cisco 3850 need?

The power consumption of the Cisco Catalyst 3850 switches ranges from approximately 50 watts to 1100 watts, depending on the model and the number of installed modules or power supplies. The power supplies available for the Cisco Catalyst 3850 series include 350WAC, 715WAC, 1100WAC, and 440WDC options.

What is the span session limit for a Cisco 3850?

The switch supports up to two local SPAN or RSPAN source sessions. You can run both a local SPAN and an RSPAN source session in the same switch or switch stack. The switch or switch stack supports a total of 64 source and RSPAN destination sessions.

For Cisco switches product list and quote, please visit: https://www.hi-network.com/categories/cisco/cisco-switches

If you need more information about Cisco devices, please contact us at www.hi-network.com  (Email: [email protected] (en inglés))