A 1GE/10GE/25GE SFP28 optical port sends and receives service data at 1 Gbit/s, 10 Gbit/s, or 25 Gbit/s.

When a 25GE optical module is connected to a port, the port can automatically adjust its rate to 25 Gbit/s.

When a 10GE optical module is connected to a port, the port can automatically adjust its rate to 10 Gbit/s.

Before installing a GE optical module or GE copper module on a port, run the port mode ge command to configure the port to work at 1 Gbit/s.

• GE eSFP optical modules

• GE-CWDM eSFP optical modules

• GE-DWDM eSFP optical modules

• GE SFP copper module

• 10GE SFP+ optical modules (OSXD22N00 and SFP-10G-ZR not supported)

• 10GE SFP+ copper module (supported in V200R023C10 and later versions)

• 25GE SFP28 optical modules

• 1 m, 2 m, 3 m, 5 m, and 10 m SFP+ high-speed copper cables

• Cables de 3 m y 10 m SFP+ AOC

• 1 m SFP28 high-speed copper cable

• 3 m, 5 m, 7 m, and 10 m SFP28 AOC cables

A 40GE/100GE QSFP28 optical port sends and receives service traffic at 40 Gbit/s or 100 Gbit/s.

A QSFP28 optical port cannot be split into four 10GE ports, regardless of whether the port uses a QSFP28 or QSFP+ optical module.

• 40GE QSFP+ optical modules

• 100GE QSFP28 optical modules

• 1 m, 3 m, y 5 m QSFP+ a QSFP+ cables de cobre de alta velocidad

• 10 m QSFP+ a QSFP+ cable AOC

• 1 m QSFP28 to QSFP28 high-speed copper cable

• 10 m QSFP28 to QSFP28 AOC cable

• Cable de pila dedicado QSFP28 de 2 m (compatible con V200R020C10 y versiones posteriores)

Console cable

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely.

You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port.

Ethernet cable

The USB port can have a Unidad flash USB connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

USB flash drive

Dimensiones básicas (excluyendo las partes que sobresalen del cuerpo): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. X 17.4 in. X 8.66 in.)

Dimensiones máximas (la profundidad es la distancia desde los puertos en el panel frontal a las partes que sobresalen del panel trasero): 43,6 mm x 442,0 mm x 231,0 mm (1,72 in. X 17.40 in. X 9.09 in.)

1+1

Pluggable AC and DC power modules can be used together in the same switch.

Cuando la altitud es de 1800-5000 m (5906-16404 pies), la temperatura de operación más alta se reduce en 1°C (1,8 °F) cada vez que la altitud aumenta en 220 m (722 pies).

El dispositivo no puede arrancar cuando la temperatura es inferior a 0°C (32°F).

When the QSFP-100G-ER4 or QSFP-100G-LR1 optical module is used, the operating temperature ranges from -5°C to +40°C (23°F to 104°F).

• Entrada AC: 100 V AC a 240 V AC; 50/60 Hz

• Entrada DC de alta tensión: 240 V DC

• Entrada DC: -48 V DC to -60 V DC

• Entrada de ca: 90-290 V AC; 45-65 Hz

• Entrada DC de alta tensión: 190 V DC a 290 V DC

• Entrada DC: -38.4 V DC to -72 V DC

• Módulo de alimentación de ca configurado: − 6 kV en modo diferencial, − 6 kV en modo común

• El módulo de alimentación de cc está configurado: − 2 kV en modo diferencial, − 4 kV en modo común

Certificación EMC

Certificación de seguridad

Certificación de fabricación