Introduction to Huawei S5731-H48T4XC

The Huawei S5731-H48T4XC is an advanced switch designed to meet the evolving needs of enterprise campus networks and data centers. This switch provides reliable, scalable, and high-performance networking capabilities, blending Layer 3 routing, intelligent operations, and security enhancements into a compact form factor. In this article, we’ll explore the specifications, features, and capabilities of this model in depth.

Target Applications

The Huawei S5731-H48T4XC is tailored for a variety of network scenarios, including:

▪ Campus network access switches for medium to large enterprises
▪ High-speed aggregation in small and medium-sized enterprise networks
▪ Network deployments requiring high-density Gigabit access with 10GbE uplinks

Productos destacados

▪ High-density Gigabit Ethernet access with 48 x Puerto 10/100/1000BASE-Ts
▪ Four 10GE SFP+ uplink ports ensuring high-speed aggregation
▪ Comprehensive Layer 2 and Layer 3 features for flexibility and control
▪ Built-in security functions including MAC address filtering and port security
▪ Intelligent operations and maintenance features for simplified network management

Key Especificaciones técnicas

Product modelo: S5731-H48T4XC (02352QPT/02352QPT-003/02352QPT-007)
Ports: 48 x 10/100/1000BASE-T Ethernet ports, 4 x 10GE SFP+ uplink ports
Forwarding Performance: 132 Mpps (Million packets per second)
Switching Capacity: 598 Gbps/2.4 Tbps (with stacking)
Power Supply: Dual pluggable AC or DC power modules supported
Dimensiones: 442 mm × 420 mm × 43.6 mm (W × D × H)
Peso: Approximately 5.4 kg (excluding power modules)
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Redundancy: Supports stacking and dual main control units for high availability
MAC Address Table: 32K entries
VLAN Support: Up to 4,094 VLANs

Performance and Architecture

High Switching Capacity

The Huawei S5731-H48T4XC provides a robust switching capacity of up to 598 Gbps, which ensures ample bandwidth for high-traffic applications. The forwarding performance of 132 Mpps guarantees low latency and efficient data handling, even under heavy loads.

Flexible Network Deployment

This switch supports hybrid networking modes, making it suitable for varying deployment needs. It can serve as both an access switch and aggregation switch, offering versatility in large and distributed network environments.

Características avanzadas

Stacking Capabilities

Huawei’s iStack technology allows multiple switches to be combined logically into a single switch. This improves redundancy, simplifies network management, and enhances the overall performance through load balancing and high availability.

Comprehensive Layer 3 Features

The switch supports extensive Layer 3 routing protocols such as OSPF, IS-IS, BGP, and RIP. This enables dynamic routing capabilities and simplifies the configuration of large-scale enterprise networks.

Enhanced Security Features

Security is a key consideration in network infrastructure. The S5731-H48T4XC supports features like DHCP snooping, dynamic ARP inspection, and IP source guard, protecting networks against spoofing and other common attacks. Moreover, it also supports ACLs (Access Control Lists) and 802.1X authentication.

Intelligent Operations and Maintenance

CloudEngine S5731 series integrates intelligent O&M features, including Telemetry and NQA (Network Quality Analyzer), which help IT teams monitor performance and troubleshoot issues in real time. This reduces downtime and ensures continuous service delivery.

Energy Efficiency

Efficient Cooling and Power Saving

The S5731-H48T4XC uses front-to-back airflow and variable-speed fans for effective cooling. Combined with intelligent power management, this design helps reduce energy consumption, making the device more environmentally friendly and cost-effective.

Support for IEEE 802.3az

The switch supports Energy Efficient Ethernet (EEE) standard, automatically reducing power usage when traffic is low. This feature is especially useful in scenarios where switch ports remain idle for extended periods.

Ease of Management

Multiple Management Interfaces

Huawei provides several methods for managing the S5731-H48T4XC, including CLI, SNMP, and a web-based GUI. This allows both novice and experienced administrators to configure and maintain the switch with ease.

Integration with Huawei iMaster NCE

The switch integrates seamlessly with Huawei’s iMaster NCE (Network Cloud Engine), enabling automated network provisioning and centralized control. This facilitates agile deployment and intelligent management across the network lifecycle.

Redundancy and High disponibilidad

Dual Hot-Swappable Power Supplies

The S5731-H48T4XC supports redundant power modules, which are hot-swappable for maintenance without disrupting network service. This ensures uninterrupted operation and maximized uptime.

Device-Level Redundancy

With support for device-level redundancy features like VRRP and hot standby, the switch provides a resilient solution that helps avoid single points of failure.

Security and Access Control

802.1X Authentication

Users can be authenticated via 802.1X before accessing the network, allowing for granular control over who can connect and what resources they can use.

MAC Address Learning Control

This feature limits the number of MAC addresses that can be learned on a port, protecting against MAC flooding attacks and enhancing network security.

Secure Boot and Certificate Management

Secure boot ensures that the software loaded on the switch has not been tampered with. The device also supports digital certificates for secure communication and management.

Deployment Scenarios

Enterprise Campus Access

The switch’s high port density and intelligent services make it ideal for serving as an access device in enterprise campus networks, providing connectivity for hundreds of end devices.

Branch Aggregation

Thanks to its 10GE uplink ports and robust routing capabilities, the S5731-H48T4XC performs well as an aggregation switch for branch offices requiring high throughput and stability.

Physical and Environmental Attributes

Robust Build Quality

The hardware design of the switch ensures long-term durability, even under intensive operating conditions. It meets strict environmental standards for heat, humidity, and electromagnetic compliance.

Flexible Mounting Options

It can be deployed in standard 19-inch racks and offers multiple ventilation options to support different installation environments.

Warranty and Support

Comprehensive Service Plans

Huawei provides a range of support options, including on-site service, software upgrades, and technical consultations to ensure customers receive consistent and reliable assistance throughout the switch’s lifecycle.

Frequently Asked Questions (FAQs)

1. What type of power supply does the S5731-H48T4XC support?

The switch supports dual pluggable AC or DC power modules, offering redundancy and uninterrupted performance.

2. Can this switch be used for Layer 3 routing?

Yes, the S5731-H48T4XC supports dynamic routing protocols including OSPF, BGP, IS-IS, and RIP.

3. Does the S5731-H48T4XC support PoE?

No, this specific model does not support Power over Ethernet (PoE). It is designed primarily for data connectivity.

4. Is stacking supported on this model?

Yes, Huawei iStack technology allows for multiple S5731-H48T4XC units to operate as a single logical device.

5. How many VLANs can be configured?

The switch supports up to 4,094 VLANs, which is the industry standard for enterprise networking.

6. What kind of management interfaces are available?

It supports web-based GUI, CLI, and SNMP for versatile management and integration with Huawei’s iMaster NCE platform.

conclusión

The Huawei S5731-H48T4XC is a feature-rich, high-performance switch tailored for modern enterprises that demand agility, reliability, and secure networking. With advanced Layer 3 routing, powerful performance metrics, and intelligent O&M tools, it is well-suited for deployment across a range of enterprise and data center environments. Its robust design, high port density, and extensive security features ensure that organizations can build future-ready networks that scale with business needs.

Huawei CloudEngine Switch S5731-H48T4XC (02352QPT/02352QPT-003/02352QPT-007)

Huawei All serie Switches New and Used

For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com  (Email: [email protected] (en inglés))

S5731-H48T4XC (02352QPT/02352QPT-003/02352QPT-007)

Version Mapping

Table 4-1493 lists the mapping between the S5731-H48T4XC chassis and software versions.

Table 4-1493 Version mapping

Series	Model	Versión del Software
S5731-H	S5731-H48T4XC	02352QPT: V200R013C02 and later versions 02352QPT-003: V200R020C10 and later versions 02352QPT-007: V200R021C10SPC600 and later versions (If V200R021C10SPC500 is used, install V200R021HP0121 or a later patch. If V200R021C00SPC100 is used, install V200R021SPH013 or a later patch.)

Appearance and Structure

Figure 4-583 S5731-H48T4XC (02352QPT) appearance

Figure 4-584 S5731-H48T4XC (02352QPT-003/02352QPT-007) appearance

1	48 puertos 10/100/1000BASE-T	2	Cuatro puertos 10GE SFP+ Módulos y cables aplicables: Módulo óptico GE Módulo óptico GE-CWDM Módulo óptico GE-DWDM GE copper module (100M/1000M auto-sensing) Módulo óptico 10GE SFP+ (no compatible con OSXD22N00) 10GE-CWDM optical module (en inglés) 10GE-DWDM optical module (en inglés) PEN remote optical modules (V200R024C00 and later versions) 1 m, 3 m, 5 m y 10 m SFP+ cables de cobre de alta velocidad Cables de 3 m y 10 m SFP+ AOC 0.5 m and 1.5 m SFP+ dedicated stack copper cables (used for zero-configuration stacking)
3	Un puerto de consola	4	Una ti ti gestión puerto
5	Un puerto USB	6	Un botón de un PNP NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.
7	Tornillo de tierra Nota: It is used with a ground cable.	8	Ranura de la tarjeta trasera Nota: Applicable card: ES5D21X08T00 ES5D21Q02Q00 S7X08000 (02312URW) (applicable in V200R019C10 and later versions) S7X08000 (02312URW-002) (applicable in V200R021C10SPC600 and later versions) S7Q02001 (02313UBW) (applicable in V200R021C01 and later versions) S7Q02001 (02313UBW-002) (applicable in V200R021C10SPC600 and later versions)
9	1 Nota: Applicable fan module: FAN-023A-B (Fan Box (B, Fan Panel Side Exhaust))	10	Ranura 2 para el módulo del ventilador Nota: Applicable fan module: FAN-023A-B (Fan Box (B, Fan Panel Side Exhaust))
11	1 Nota: Applicable power module: PAC600S12-CB (600 W AC&240 V DC Power Module) PAC600S12-EB (600 W AC&240 V DC Power Module) PAC600S12-DB (600 W AC&240 V DC Power Module) (applicable in V200R020C10 and later versions) PDC1000S12-DB (1000 W DC Power Module) PAC150S12-R (150 W AC Power Module) PDC180S12-CR (180 W DC Power Module) (applicable in V200R020C00 and later versions)	12	Ranura para módulo de potencia 2 Nota: Applicable power module: PAC600S12-CB (600 W AC&240 V DC Power Module) PAC600S12-EB (600 W AC&240 V DC Power Module) PAC600S12-DB (600 W AC&240 V DC Power Module) (applicable in V200R020C10 and later versions) PDC1000S12-DB (1000 W DC Power Module) PAC150S12-R (150 W AC Power Module) PDC180S12-CR (180 W DC Power Module) (applicable in V200R020C00 and later versions)

Port descripción

10/100/1000BASE-T port

A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1494 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.

Table 4-1494 Attributes of a 10/100/1000BASE-T Ethernet electrical port

Attribute	descripción
Tipo de conector	RJ45
Standards compliance	IEEE802.3, IEEE802.3u, IEEE802.3ab
Modo de trabajo	10/100/1000 Mbit/s auto-sensing
Maximum transmission distance	100 m

10GE SFP+ optical port

A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-1495 describes the attributes of a 10GE SFP+ Ethernet optical port.

Table 4-1495 Attributes of a 10GE SFP+ port

Attribute	descripción
Tipo de conector	LC/PC
Optical port attributes	Depend on the optical module used
Standards compliance	IEEE802.3ae
Modo de trabajo	GE/10GE auto-sensing

Puerto de consola

The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1496.

Table 4-1496 Attributes of a console port

Attribute	descripción
Tipo de conector	RJ45
Standards compliance	RS-232
Modo de trabajo	Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate	9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s Default value: 9600 bit/s

Gestión del puerto

You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1497 describes the attributes of an ETH management port.

Table 4-1497 Attributes of an ETH management port

Attribute	descripción
Tipo de conector	RJ45
Standards compliance	IEEE802.3
Working Mode	10/100 Mbit/s auto-sensing
Maximum transmission distance	100 m

In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see "First Login to a Switch" in the Configuration Guide - Basic Configuration. If you have logged in to the switch for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.

Puerto USB

The USB port can have a USB flash drive connected to upgrade the switch, or transfer configuration files or other files. The USB port can only connect to a USB flash drive that complies with USB 2.0.

USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.

Indicator Description

The S5731-H48T4XC has similar indicators to those on the S5731-H48P4XC except that the S5731-H48T4XC does not have a PoE mode indicator. For details, see Indicator Description.

Power Supply Configuration

The switch can use a single power module or double power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch. However, the power modules with natural heat dissipation and the power modules with fan cannot be used at the same time.

Disipación de calor

The S5731-H48T4XC uses pluggable fan modules for forced air cooling. Air flows in from the front side and exhausts from the rear panel.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-1498 lists technical specifications of the S5731-H48T4XC.

Table 4-1498 Technical specifications

El artículo	Description
Memoria (RAM)	4 GB
Flash	1 GB en total. Para ver el tamaño de la memoria flash disponible, ejecute the Versión de visualizaciónRe88pl99ace1command.
Tiempo medio entre fallas (MTBF)	55 años
Availability	> 0.99999
Protección de puertos de servicio	Modo común: − 6 kV
Protección contra aumento de tensión de la fuente de alimentación	Usando módulos de alimentación de ca: − 6 kV en modo diferencial, − 6 kV en modo común Usando módulos de alimentación DC: − 2 kV en modo diferencial, − 4 kV en modo común
Dimensiones (H x W x D)	Dimensiones básicas (excluyendo las partes que sobresalen del cuerpo): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. X 17.4 in. X 16.5 in.) Dimensiones máximas (la profundidad es la distancia desde los puertos en el panel delantero a la manija en el panel trasero): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. X 17.4 in. X 17.7 in.)
Peso (con embalaje)	8.55 kg (18.85 lb)
Puertos de pila	Puertos 10GE SFP+ en el panel frontal, o puertos en la tarjeta trasera
RTC	apoyado
RPS	No soport
PoE	No soport
Rango de tensión nominal	Entrada de ca: 100 V de ca a 240 V de ca, 50/60 Hz Entrada DC de alta tensión: 240 V DC Entrada DC: -48 V DC to -60 V DC
Rango de tensión máxima	Entrada de ca: 90 V de ca a 290 V de ca, 45 Hz a 65 Hz Entrada DC de alta tensión: 190 V DC a 290 V DC Entrada DC: -38.4 V DC to -72 V DC
Consumo máximo de energía (100% de rendimiento, velocidad máxima de los ventiladores)	124 W (sin tarjeta)
Consumo típico de energía (30% de la carga de tráfico, probado según la norma ATIS)	101 W (sin tarjeta)
Temperatura de funcionamiento	-5°C a +45°C (23°F a 113°F) a una altitud de 0-1800 m (0-5906 pies). Nota: Cuando la altitud es de 1800-5000 m (5906-16404 pies), la temperatura de operación más alta se reduce en 1°C (1,8 °F) cada vez que la altitud aumenta en 220 m (722 pies). El interruptor no se puede iniciar cuando la temperatura ambiente es inferior a 0°C (32°F).
Temperatura de almacenamiento	-40°C a +70°C (-40°F a +158°F)
Ruido a temperatura normal (27°C, potencia acústica)	< 57,5 dB(A)
Humedad relativa	5% a 95%, sin condensación
Altitud de operación	0-5000 m (0-16404 pies)
certificación	Certificación EMC Certificación de seguridad Certificación de fabricación
Número de pieza	02352QPT 02352QPT-003 02352QPT-007