For instructions on setting up the switch using the WebUI, refer to the required version of the software configuration guide. In the guide, go to Configuring the Switch Using the Web User Interface.
You can access the CLI on a configured or unconfigured switch by connecting the RJ-45 console port or USB console port of the switch to your PC or workstation and accessing the switch through a terminal emulation program.
 nota | If you have stacked your switches, connect to the console port of one of the switches in the stack. You can initially configure the entire stack from any member switch. |
Step 1 | Connect the RJ45 port adapter to the serial port on the terminal server or your PC using the optional RJ45-to-DB9 adapter cable. Connect the other end of the cable to the switch console port. |
Step 2 | Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application such as Putty or TeraTerm, makes communication between the switch and your PC or terminal possible. |
Step 3 | Configure the baud rate and character format of the PC or terminal to match the console port default characteristics:
|
Step 4 | Power on the switch. |
Step 5 | The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. |
The Cisco Catalyst 9300 Series Switches will either have the Cisco USB Device or Silicon Labs USB Device (CP2102N). To identify which USB device is in the switch, do the following:
Connect a USB cable from the Windows-based PC or Mac-based PC to the USB console port.
On the Windows-based PC, open the Device Manager or on the Mac-based PC, open the System Report and view the following:
Type of USB Device | Device Name |
|---|---|
Cisco USB device | Cisco USB Console or USB Serial Device |
Silicon Labs USB device | Silicon Labs CP210x USB to UART Bridge or CP2102N USB to UART Bridge |
Step 1 | To install the USB driver to a Windows-based PC or Mac-based PC for the first time, do the following:. Windows-based PC
Mac-based PC
| ||||
Step 2 | Connect a USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B (5-pin-connector) USB console port. | ||||
Step 3 | Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application such as Putty or TeraTerm, makes communication between the switch and your PC or terminal possible. | ||||
Step 4 | Configure the baud rate and character format of the PC or terminal to match the console port default characteristics:
| ||||
Step 5 | Power on the switch as described in the switch getting started guide. | ||||
Step 6 | The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow the steps in the Setup program. |
A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB console port on the switch.
Step 1 | Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it.
Windows 10 includes a USB to RS232 driver. However for added functionality, download the USB Console Software from the Software Download Center at cisco.com. | ||
Step 2 | If using 32-bit Windows, double-click the setup.exe file in the Windows_32 folder. If using 64-bit Windows, double-click the setup(x64).exe file in the Windows_64 folder. | ||
Step 3 | The Cisco Virtual Com InstallShield Wizard begins. Click Next. | ||
Step 4 | The Ready to Install the Program window appears. Click Install.
| ||
Step 5 | The InstallShield Wizard Completed window appears. Click Finish. | ||
Step 6 | Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation. |
Step 1 | Connect a USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B (5-pin-connector) USB console port. | ||
Step 2 | Launch the Windows Update page by clicking on the Update & Security button on the Windows Settings. | ||
Step 3 | Click View optional updates. | ||
Step 4 | Expand Driver updates and select Silicon Laboratories Inc. – Ports 10.x.x.x. | ||
Step 5 | Click Download and install button. Once the driver installation is complete, disconnect the USB cable from the PC USB port and the switch.
|
Disconnect the switch console terminal before uninstalling the driver.
Step 1 | Run setup.exe for Windows 32-bit or setup(x64).exe for Windows-64bit. Click Next. | ||
Step 2 | The InstallShield Wizard for Cisco Virtual Com appears. Click Next. | ||
Step 3 | When the Program Maintenance window appears, select the Remove radio button. Click Next. | ||
Step 4 | When the Remove the Program window appears, click Remove.
| ||
Step 5 | When the InstallShield Wizard Completed window appears, click Finish. |
Cisco Catalyst 9300 Series Switches
Cisco All Series Switches New and Refurbished
For Cisco product list and quote, please visit: https://www.hi-network.com/categories/cisco or contact us at www.hi-network.com (Email: [email protected] (en inglés))
Etiquetas calientes:
CISCO Switches
Regístrepor correo electrónico ahora para acciones semanales de promoción
100% free, Unsubscribe any time!
Add 1: Room 605 6/F FA YUEN Commercial Building, 75-77 FA YUEN Street, Mongkok KL, HongKong Add 2: Room 405, Building E, MeiDu Building, Gong Shu District, Hangzhou City, Zhejiang Province, China
Whatsapp/Tel: +8618057156223 Tel: 0086 571 86729517 Tel en Hong Kong: 00852 66181601
Correo electrónico: [email protected]
English
Pусский
Français
Español
Português
