Regístrese ahora para una mejor cotización personalizada!

MAC query by IP address on Huawei S5700 switch

Dec, 06, 2023 Hi-network.com

Descripción de la pregunta


How to view the mac address of the device itself through commands on the switch, and commands to query the mac address of the device through ip?


Solution: Command to view the mac address of the device itself


Commands to view the mac address of the device itself


For boxed devices, such as S2700/5700/S6700, you can view the mac address of the Layer 2 interface, which is the MAC of the device.


As follows, it is the mac address of the device: 1047-8031-bbd0


[S5700]display interface

Eth-Trunk0 current state : DOWN

Estado actual del protocolo de línea: DOWN

Description.

Switch Port, Link-type : dot1q-tunnel.

PVID : 10, Hash arithmetic : According to SA-XOR-DA,The Maximum Frame Length is 1600

IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 1047-8031-bbd0

Current system time: 2015-02-11 14:30:57+08:00

Last 300 seconds input rate 0 bits/sec, 0 packets/sec

Last 300 seconds output rate 0 bits/sec, 0 packets/sec

Input: 0 packets, 0 bytes

  Unicast: 0, Multicast: 0

  Broadcast: 0, Jumbo: 0

  Discard: 0, Pause: 0

  Frames: 0


  Total Error: 0

  CRC: 0, Giants: 0

  Jabbers: 0, Fragments: 0

  Runts: 0, DropEvents: 0

  Alignments: 0, Symbols: 0

  Ignoreds: 0


Output: 0 packets, 0 bytes

  Unicast: 0, Multicast: 0

  Broadcast: 0, Jumbo: 0

  Discard: 0, Pause: 0

                                         

  Total Error: 0

  Collisions: 0, ExcessiveCollisions: 0

  Late Collisions: 0, Deferreds: 0

  Buffers Purged: 0


    Input bandwidth utilization : 0%

    Output bandwidth utilization : 0%


If it is an S9300 device, you can view it with the command display system-mac


<S9303>display system-mac

MAC-num :1

Index MAC Addr

----------------------------

default 0025-9e03-1329


current d46a-b330-d341


If you need to view the mac address of the attached device through the ip address, add a parameter to the dis arp command to see all the ip and mac addresses under a certain interface, the command is as follows:


<S_Buick>sys

Enter system view, return user view with Ctrl+Z.

[S_Buick]dis arp interface ethernet 0/0/36

IP ADDRESS      MAC ADDRESS     EXPIRE(M) TYPE INTERFACE      VPN-INSTANCE      VLAN

------------------------------------------------------------------------------

192.168.3.38    900b-a60a-3b61  3         D-0  Eth0/0/36           3

192.168.3.39    4007-fc49-5c63  4         D-0  Eth0/0/36            3

192.168.3.42    4007-fc48-87cb  13        D-0  Eth0/0/36           3

192.168.3.37    4007-fc6b-3389  3         D-0  Eth0/0/36            3

192.168.3.41    4007-e68c-8bb5  1         D-0  Eth0/0/36           3

192.168.3.40    1009-05fb-3eec  7         D-0  Eth0/0/36            3

------------------------------------------------------------------------------

Total:6         Dynamic:6       Static:0    Interface:0

tag-icon Etiquetas calientes: Huawei Switches HUAWEI interruptores

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.
Our company's operations and information are independent of the manufacturers' positions, nor a part of any listed trademarks company.