Especificaciones físicas

●  Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis

●  Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm)

●  Weight:

◦   Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2

◦   Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK

Condiciones ambientales

Temperatura de funcionamiento:

●  Agency-certified for operation: 32 to 104°F (0 to 40°C)

●  Design and tested for operation 32 to 130°F (0 to 55°C)

●  Storage temperature: –40 to 167°F (–40 to 75°C)

●  Relative humidity: 10 to 90 percent, noncondensing

Operating altitude:

●  Agency-certified for operation: –500 to 6500 ft (–150 to 2000m)

●  Designed and tested for operation –500 to 10000 ft (–150 to 3000m)

Cumplimiento normativo

Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards:

EMC Standards:

●  FCC Part 15 (CFR 47) Class A

●  ICES-003 Class A

Re88pl99ace1 VCCI clase A

●  EN55022 Class A

●  EN55024

  CISPR24

Re88pl99ace1 CISPR 22 clase A

●  AS/NZS CISPR 22 Class A

●  ETS 300 386

●  KN 22 Class A

●  EN 50082-1

●  EN61000-3-2

●  EN61000-3-3

●  EN61000-6-1

●  CNS13438 Class A

●  KN6100 -4 Series

Safety Standards:

Re88pl99ace1 UL 60950-1

●  CAN/CSA C22.2 No. 60950

Re88pl99ace1 EN 60950-1

Re88pl99ace1 IEC 60950-1

●  AS/NZS 60950-1

●  IEC 60825 Class 1

●  EN 60825 Class 1

●  21CFR 1040

NEBS criteria levels

SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)

ETSI

●  ETS 300 019-2-1, Class 1.1 Storage

●  ETS 300 019-2-2, Class 2.1 and 2.2 Transportation

●  ETS 300 019-2-3, Class 3.1E Stationary Use

Network management

●  ETHERLIKE-MIB (RFC 1643)

●  IF-MIB (RFC 1573)

●  Bridge MIB (RFC 1493)

●  CISCO-STACK-MIB

  CISCO-VTP-MIB

  CISCO-CDP-MIB

●  RMON MIB (RFC 1757)

●  CISCO-PAGP-MIB

  CISCO-STP-EXTENSIONS-MIB

●  CISCO-VLAN-BRIDGE-MIB

  CISCO-VLAN-MEMBERSHIP-MIB

●  ENTITY-MIB (RFC 2037)

●  HC-RMON

●  RFC1213-MIB (MIB-II)

●  SMON-MIB

Requisitos de potencia

●  WS-X6716-10T-3C: 509.3W (12.1A @ 42V)

●  WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V)

●  WS-X6716-10G-3C: 457.8W (10.9A @ 42V)

●  WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V)

●  WS-X6708-10G-3C: 444.36W (10.58A @ 42v)

●  WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)

●  WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V)

●  WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V)

●  WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)

●  WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)

●  WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)

●  WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)

indicadores

●  Status: green (operational), red (faulty), and orange (module booting)

●  Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)