modelo

AirEngine 8760R-X1E

Número de pieza

02353GSH 02353GSH-001

descripción

AirEngine8760R-X1E (11ax outdoor, Dedicated 3rd Radio, 8+8 dual bands, external antenna, BLE, PSE)

Tipo de instalación

Wall, Pole

Dimensiones sin embalaje (H x W x D) [mm(in.)]

Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.)

Peso sin embalaje [kg(lb)]

4.05 kg (8.93 lb)

Almacenamiento de almacenamiento

NAND Flash 512 MB; NOR Flash 16 MB

Puerto de consola

BLE console

Consumo máximo de energía [W]

53.2 (excluding PoE OUT)

Máxima disipación de calor [BTU/ hora]

181.5 (without PoE OUT)

Modo de alimentación

PoE

Rango de tensión de entrada [V]

PoE: 802.3bt

Protección de puertos de servicio

6 kA in common mode

Potencia de salida PoE máxima [W]

15.4 W

Número máximo de puertos físicos en todo el dispositivo

10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing

GE (RJ45) x 1, 10M/100M/1000M auto-sensing

10GE optical port (SFP+), GE/10GE auto-sensing

Temperatura de funcionamiento a largo plazo [°C(°F)]

–40°C to +65°C (–40°F to +149°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Temperatura de almacenamiento [°C(°F)]

–40°C to +85°C (–40°F to +185°F)

Humedad relativa operativa a largo plazo [hr]

0% RH to 100% RH

Altitud operativa a largo plazo [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

Nivel de protección contra la entrada (resistente al polvo/al agua)

IP68

El terreno

Puesta a tierra

Antenna port surge protection [kA]

5 kA surge protection capability without external surge protection devices

Wind resistance

67 m/s

USB

No soport

IoT slot

No soport

BLE

BLE5.2

Radio number

2/3

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Dual-radio standard mode:

- Radio 0 (2.4 GHz): 8x8:4 (A maximum of four antennas connected to RF ports A through D can be used to transmit and receive 802.11b packets.)

- Radio 1 (5 GHz): 8x8:8

Triple-radio mode:

- Radio 0 (2.4 GHz): 8x8:4 (A maximum of four antennas connected to RF ports A through D can be used to transmit and receive 802.11b packets.)

- Radio 1 (5 GHz): 4x4:4

- Radio 2 (5 GHz): 4x4:4

Dual-radio + independent radio scanning mode:

- Radio 0 (2.4 GHz): 4x4:4

- Radio 1 (5 GHz): 4x4:4

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Antena externa

Antenna gain

BLE: 5 dBi

Maximum transmit power

2.4 GHz: 33 dBm

5 GHz: 33 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 24 dBm/chain

5 GHz: 24 dBm/chain)

BLE: < 10 dBm

MTBF [año]

60.2

MTTR [hora]

0.5

Frequency stability [ppm]

+/-20

802.3bt power supply description

In 802.3bt Class 8 power supply mode:

If the PoE OUT port is not used, no function is restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. 

If the PoE OUT port (supporting only 802.3af) is used, the 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. Other functions are not restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. 

In 802.3bt Class 6 power supply mode:

If the PoE OUT port is not used:

Wi-Fi: The transmit power of radios is not affected.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (8x8)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz (4x4)

Wired network port: The 10GE electrical port and the SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available.

Other ports: The PoE OUT port is not used.

If the PoE OUT port is used:

Wi-Fi: The radio power is self-adapted.

- Standard dual-radio mode: 2.4 GHz (4x4) + 5 GHz (4x4)

- Dual-radio + independent scanning radio mode: 2.4 GHz (4x4) + 5 GHz (4x4) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz (2x2)

Wired network port: The 10GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available.

Other ports: The PoE OUT port (supporting only 802.3af) is used.

802.3at power supply description

Wi-Fi: The radio power is self-adapted.

- Standard dual-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2)

- Dual-radio + independent scanning radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz independent scanning radio

- Triple-radio mode: 2.4 GHz (2x2) + 5 GHz (2x2) + 5 GHz (2x2)

Wired network port: The rate of the 10GE electrical port rate is reduced to GE or lower and works with the SFP+ optical port as combo ports. When one of them is working, the other is unavailable. The GE electrical port is not available.

Other ports: The PoE OUT port is unavailable.