modelo

AirEngine 5760-22W

Número de pieza

02353KBE

descripción

AirEngine5760-22W (11ax indoor, 2+4 dual bands, smart antenna, USB, BLE, PSE)

Tipo de instalación

Wall, Junction Box

Dimensiones sin embalaje (H x W x D) [mm(in.)]

170 mm x 86 mm x 74 mm (6.69 in. x 3.39 in. x 2.91 in.)

Peso sin embalaje [kg(lb)]

0.70 kg (1.54 lb)

Almacenamiento de almacenamiento

NAND Flash 512 MB; NOR Flash 16 MB

Puerto de consola

BLE console

Consumo máximo de energía [W]

25.29 (excluding USB and PoE OUT ports)

Máxima disipación de calor [BTU/ hora]

86.3 (without USB and PoE OUT)

Modo de alimentación

PoE, DC power adapter

Tensión nominal de entrada [V]

48 V

Rango de tensión de entrada [V]

DC: 43.2 V to 57.6 V

PoE: 802.3bt/at

Protección de puertos de servicio

PoE port:

Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B

Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B

PoE

apoyado

Potencia de salida PoE máxima [W]

13.6 W (When the maximum transmission distance through a CAT5E Ethernet cable is 40 m, the port can connect to an 802.3af-compliant PD requiring power of less than 12.95 W.)

Número máximo de puertos físicos en todo el dispositivo

2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing

GE (RJ45) x 4, 10M/100M/1000M auto-sensing

10GE optical port (SFP+), GE/10GE auto-sensing

Temperatura de funcionamiento a largo plazo [°C(°F)]

0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)

Temperatura de almacenamiento [°C(°F)]

-40 °C a +70°C (-40 °F a +158°F)

Humedad relativa operativa a largo plazo [hr]

5% de hr a 95% de hr, sin condensación

Altitud operativa a largo plazo [m(ft.)]

–60 m to +5000 m (–196.85 ft to +16404.20 ft)

Atmospheric pressure [kPa]

53kPa - 106kPa ETSI 300 019-2-3

El terreno

floating ground

USB

USB 2.0

IoT slot

IoT extension by USB

BLE

BLE5.0

Radio number

2

Operating frequency band

2.4GHz,5GHz

MIMO spatial streams

Radio 0 (2.4 GHz): 2x2, maximum bandwidth of 40 MHz

Radio 1 (5 GHz): 4x4, maximum bandwidth 160 MHz

Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax

Radio interface

Built-in smart antennas

Antenna gain

2.4 GHz: 4 dBi

5 GHz: 5 dBi

BLE: 4 dBi

Maximum transmit power

2.4 GHz: 23 dBm

5 GHz: 26 dBm

(Note: This is the total MIMO radio power, the same as:

2.4 GHz: 20 dBm/chain

5 GHz: 20 dBm/chain)

BLE: < 10 dBm

MTBF [año]

37

MTTR [hora]

0.5

Frequency stability [ppm]

+/-20

802.3bt power supply description

Wi-Fi:

- If no optical port is used, Wi-Fi is not restricted.

- If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available.

Other ports: not restricted

802.3at power supply description

Wi-Fi:

- If the USB and PoE out ports are not used and only the 2.5GE electrical port is used as the uplink port, Wi-Fi supports the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (4x4, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

- If an optical port or the 2.5 W USB port is used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available.

Other ports: Only the 2.5 W USB port is supported. The 5 W USB port and PoE OUT port are unavailable.

802.3af power supply description

The 802.3af power supply is not supported.

DC power supply description

Wi-Fi:

- If no optical port is used, Wi-Fi is not restricted.

- If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected.

Wired network port: not restricted

Other ports: not restricted